1 Package Visualization
The box updates dynamically based on your current length, width, and height inputs.
Use our DIM (Dimensional Weight) calculator to compare actual weight vs. dimensional weight and find the billable weight for better shipping rate decisions.
The box updates dynamically based on your current length, width, and height inputs.
请输入包装完成后的外部尺寸与实重:英制使用 in/lb,公制使用 cm/kg。系数的单位分别为 in³/lb、cm³/kg;请按具体服务及账户规则选用,预设不是承运商报价。Enter packed external dimensions and actual weight: in/lb for imperial or cm/kg for metric. Factor units are in³/lb and cm³/kg. Select the factor for the service and account; a preset is not a carrier quote.
使用的计费系数: DIM Factor Used: 139
尺寸、实重、系数和估算摘要将带入报价备注;请补充起运地、目的地、商品及服务需求。Dimensions, actual weight, factor, and estimate will prefill the quote notes. Add origin, destination, contents, and service requirements.
Dimensional weight (also called volumetric weight) estimates shipping weight from parcel size. Carriers use it to account for vehicle and sortation space, not only physical mass.
For eCommerce and 3PL teams, oversized but lightweight parcels can be billed higher than expected.
Billable weight is the greater of actual weight and DIM weight. If package volume creates a larger DIM value, carriers usually bill using DIM weight.
Billable Weight Rule The greater of actual weight and dimensional weight
不同承运商和服务产品可能采用不同的计费系数。 Carrier and service-level DIM factors can differ from common industry approximations.
查看计费系数表 View DIM Factor Table以下为行业常见近似对照。不同承运商和服务产品的实际计费系数可能不同。 These are common industry approximations. Actual DIM factors may differ by carrier and service.
| DIM Factor (in³/lb) | DIM Factor (cm³/kg) |
|---|---|
| 139 | 5000 |
| 166 | 6000 |
| 194 | 7000 |
| 220 | 8000 |
| 250 | 9000 |
Carriers usually bill by the greater of actual weight and dimensional weight, so parcel size directly affects billable weight.
| Formula mode | Calculation |
|---|---|
| inch / lb | 体积重量(磅)=(长 × 宽 × 高)÷ 计费系数 DIM Weight (lb) = (Length × Width × Height) ÷ DIM Factor |
| cm / kg | 体积重量(千克)=(长 × 宽 × 高)÷ 计费系数 DIM Weight (kg) = (Length × Width × Height) ÷ DIM Factor |
Actual weight is the physical scale weight, while DIM weight is calculated from package size. Billing usually uses the larger value.
Billable weight is max(actual weight, dimensional weight). Use this value as your primary cost reference.
以下均为假设算例,只比较数学结果,不代表某承运商会对此包裹启用 DIM 计费。三个结果都未加入承运商进位或其他费用。These hypothetical examples compare mathematical results only. They do not establish whether a carrier applies DIM billing to the parcel. All results exclude carrier rounding and other charges.
| 情景Case | 输入假设Assumed inputs | 计算过程Calculation |
|---|---|---|
| 体积重较大DIM weight is higher | 12 × 8 × 6 in;实重 2 lb;系数 13912 × 8 × 6 in; actual 2 lb; factor 139 | 576 ÷ 139 ≈ 4.144 lb;max(2, 4.144) ≈ 4.144 lb576 ÷ 139 ≈ 4.144 lb; max(2, 4.144) ≈ 4.144 lb |
| 实重较大Actual weight is higher | 相同尺寸与系数;实重 7 lbSame dimensions and factor; actual 7 lb | 体积重约 4.144 lb;max(7, 4.144) = 7 lbDIM ≈ 4.144 lb; max(7, 4.144) = 7 lb |
| 公制与系数换算Metric and factor conversion | 30.48 × 20.32 × 15.24 cm;实重 0.90718474 kg30.48 × 20.32 × 15.24 cm; actual 0.90718474 kg | 体积 9,438.948864 cm³;139 × 16.387064 ÷ 0.45359237 ≈ 5,021.69358 cm³/kg。按该等效系数得约 1.880 kg;使用独立预设 5000 得约 1.888 kg。Volume 9,438.948864 cm³; 139 × 16.387064 ÷ 0.45359237 ≈ 5,021.69358 cm³/kg. That equivalent factor gives ≈1.880 kg; the separate 5000 preset gives ≈1.888 kg. |
139 与 5000 并不精确等价。切换单位会转换尺寸与实重,并选用新单位的首个预设;自定义系数数值不会自动转换。需要比较同一数学结果时,用下方换算器取得等效系数并填入自定义栏。139 and 5000 are not exactly equivalent. Switching units converts measurements and selects the first preset for the new unit; a custom factor’s numeric value is not converted. To preserve the same mathematical result, use the factor converter below and enter its equivalent as a custom factor.
例如,UPS 官方尺寸与重量指南要求尺寸向上取整,并区分 Daily 与 Retail 的 DIM 系数;其重量规则还包括相应进位。该规定仅作服务规则差异的例子,本工具不会自动套用到其他承运商、账户或服务。For example, the UPS dimensions and weight guiderequires upward dimension rounding, distinguishes Daily and Retail DIM divisors, and describes weight rounding. This illustrates service-specific rules; this tool does not apply them automatically to other carriers, accounts, or services.
核验:2026-10-30。另请确认 DIM 启用门槛、包装类型、尺寸测量、重量进位及附加费;可继续阅读报价与最终账单差异。Checked October 30, 2026. Confirm DIM thresholds, packaging, measurement, weight increments, and surcharges. Continue to quote versus final charges.
Dimensional weight is a billing method based on parcel volume instead of actual weight.
Use Length × Width × Height ÷ DIM Factor, then compare against actual weight in carrier billing rules.
Actual weight is measured on a scale, while dimensional weight is calculated from package dimensions and DIM factor. Billing usually uses the higher value.
本工具取实重与体积重的较高值,显示为承运商进位前的估算。实际计费还需核实 DIM 启用门槛、尺寸取整、重量进位和服务条款。This tool takes the greater of actual and DIM weight as an estimate before carrier rounding. Actual billing also depends on DIM thresholds, dimension rounding, weight increments, and service terms.
Start with common presets, then confirm the exact factor from your carrier service policy.
139 is a widely used reference factor in U.S. parcel services, but the final DIM factor depends on carrier and service type.
Yes. In most logistics contexts, dimensional weight and volumetric weight refer to the same billing concept.
No. DIM factors can vary by carrier, service, destination, and contract terms, so confirm with the active billing policy.
提交运单信息,我们将结合具体线路和服务规则评估费率。 Submit your shipment info and we will review rates using the specific lane and service rules.